
BRONKHORST®
Page 22 Operational instructions for digital multibus instruments 9.17.023
APACITY UNIT
This parameter gives access to the extended unit table which is available for MBC3 type of instruments
only.
For MBC-II type of instruments this parameter can only be read.
Only if sensor type = 4 (other sensor type) this parameter can be written
For MBC3 type of instruments this parameter can be read and written.
The easiest way to change a unit in the MBC3 type of instrument is to fill in the unit needed from the
table below in capacity unit.
The “Capacity unit” displays the unit name set by “Capacity unit index”. A valid “Capacity unit”(for example ln/min) can
also be entered here which changes the “Capacity unit index”. In MBC3 type of instruments the parameter is not
secured.
Pressure
Mass Flow
(Custom)
Volume
Flow
Volume
Volume
Due to compatibility the maximum string length is limited to 7 characters. Therefore unit names may
be truncated. For instance mm3n/m means mm3n/min.
Kommentare zu diesen Handbüchern